90-90 Vertical at Fixture Connection

The 90-90 Vertical at Fixture Connection command is used to insert a connecting pipe at a 90-degree angle to the pipe, which then turns 90 degrees to connect to the fixture. Once it reaches the fixture, it will either rise or drop from the elevation of the pipe to the elevation of the fixture.

To make a 90-90 vertical connection at the fixture, go to

Ribbon: DM Plumbing->Fixtures-> dm_plumb-fixtureConnection-single9090 90-90 Vertical at Fixture Connection

Pulldown Menu: DM Plumbing->Fixtures->90-90 Vertical at Fixture Connection

You will be prompted to identify which fixture to connect to a pipe.

Select fixture to connect:

You will then be prompted to select the pipe to which the fixture will be connected.

Select pipe at connection point:

The fixture and the pipe will be connected.

Related Options

Break width: Sets the width of the break in a pipe if it is overlapped by another pipe.

Vertical pipe drafting method: Sets how vertical pipes are drawn.

This option can be further customized with the Minimum vertical pipe diameter and Not to scale vertical pipe diameter options.

Page url: http://www.designmaster.biz/docs/plumb/index.html?90_90_vertical_at_fixture_conn.htm
©2012-2023 Design Master Software, Inc