Direct 45 Vertical at Wall

The Direct 45 Vertical at Wall command is used to insert a connecting pipe at a 45-degree angle to the pipe. The connecting pipe then rises or drops inside a wall from the elevation of the pipe to the elevation of the fixture before connecting to the fixture.

To make a direct 90 connection with a vertical pipe in a wall, go to

Ribbon: DM Plumbing->Fixtures-> dm_plumb-fixtureConnection-multiple45-wall Direct 45 Vertical at Wall

Pulldown Menu: DM Plumbing->Fixtures->Direct 45 Vertical at Wall

You will be prompted to identify which fixtures to connect to a pipe.

Select fixtures to connect:

You will then be prompted to select the pipe to which the selected fixtures will be connected.

Select pipe to connect to:

You will then be prompted to select a point inside the wall in which the vertical pipes will be inserted.

Specify point inside wall where vertical pipes will be located:

The fixtures and the pipe will be connected.

Related Options

Break width: Sets the width of the break in a pipe if it is overlapped by another pipe.

Vertical pipe drafting method: Sets how vertical pipes are drawn.

This option can be further customized with the Minimum vertical pipe diameter and Not to scale vertical pipe diameter options.


Page url: http://www.designmaster.biz/docs/plumb/index.html?direct_45_vertical_at_wall.htm
©2012-2023 Design Master Software, Inc