Direct 90 Vertical at Pipe Connection

The Direct 90 Vertical at Pipe Connection command is used to insert a connecting pipe that rises or drops from the elevation of the pipe to the elevation of the fixture, then connects to the fixture at a 90-degree angle to the pipe.

To make a direct 90 vertical connection at the pipe, go to

Ribbon: DM Plumbing->Fixtures-> dm_plumb-fixtureConnection-perpendicular-vertical Direct 90 Vertical at Pipe Connection

Pulldown Menu: DM Plumbing->Fixtures->Direct 90 Vertical at Pipe Connection

You will be prompted to identify which fixtures to connect to a pipe.

Select fixtures to connect:

You will then be prompted to select the pipe to which the selected fixtures will be connected.

Select pipe to connect to:

The fixtures and the pipe will be connected.

Related Options

Break width: Sets the width of the break in a pipe if it is overlapped by another pipe.

Vertical pipe drafting method: Sets how vertical pipes are drawn.

This option can be further customized with the Minimum vertical pipe diameter and Not to scale vertical pipe diameter options.


Page url: http://www.designmaster.biz/docs/plumb/index.html?direct_90_vertical_pipe_connection.htm
©2012-2023 Design Master Software, Inc