The End Vertical at Fixture Connection command is used to insert a connecting pipe to the end of the pipe, which goes directly toward the fixture and then rises or drops from the elevation of the pipe to the elevation of the fixture.
To make a vertical end connection at the fixture, go to
Ribbon: DM Plumbing->Fixtures-> 
End Vertical at Fixture Connection
Pulldown Menu: DM Plumbing->Fixtures->End Vertical at Fixture Connection
You will be prompted to identify which fixture to connect to a pipe.
Select fixture to connect:
You will then be prompted to select the pipe to which the fixture will be connected.
Select pipe to connect to:
The fixture and the pipe will be connected.
|
Break width: Sets the width of the break in a pipe if it is overlapped by another pipe. Vertical pipe drafting method: Sets how vertical pipes are drawn. This option can be further customized with the Minimum vertical pipe diameter and Not to scale vertical pipe diameter options. |