Move Alignment Point
|Up Previous Next|
The Move Alignment Point command can be used to move an alignment point on the drawing. You can also use standard CAD commands to move the alignment point.
To move an alignment point, go to
Ribbon: DM Plumbing->Alignment Points-> Move Alignment Point
Pulldown Menu: DM Plumbing->Alignment Points->Move Alignment Point
If there is only one alignment point on the drawing, you will be prompted for the new location.
If there is more than one alignment point on the drawing, you will be prompted to indicate which alignment point you want to move.
Specify point in area to move alignment point in:
Select a point inside the alignment point area that corresponds to the alignment point you want to move.
You will then be prompted to indicate the new location for the alignment point.
Specify second point or <use first point as displacement>:
After the alignment point is moved, the location of all of the devices in the database will be updated to reflect the new location.
You cannot move an alignment point outside of its alignment point area.
©2012-2023 Design Master Software, Inc