End Vertical at Pipe Connection
|Up Previous Next|
The End Vertical at Pipe Connection command is used to insert a connecting pipe to the end of the pipe, which rises or drops from the elevation of the pipe to the elevation of the fixture and then goes directly toward the fixture.
To make a vertical end connection at the pipe, go to
Ribbon: DM Plumbing->Fixtures-> End Vertical at Pipe Connection
Pulldown Menu: DM Plumbing->Fixtures->End Vertical at Pipe Connection
You will be prompted to identify which fixture to connect to a pipe.
Select fixture to connect:
You will then be prompted to select the pipe to which the fixture will be connected.
Select pipe to connect to:
The fixture and the pipe will be connected.
©2012-2023 Design Master Software, Inc