Change Link

Allows you to change which fire alarm panel is represented by a panel graphic on the riser diagram.

tip

If you copy riser diagram graphics using the Revit Copy command, the copied graphics will not be linked to the model. Use this command to link the copied graphics for panels.

You will be prompted to specify a fire alarm panel.

Select fire alarm panel to link to different panel in model:

The Select Panel to Link dialog box will open:

•  Tree / List ☰ All of the panels in the current project. They are listed in a tree corresponding to how the panels are connected to each other, and alphabetically by callout. Panels that have been inserted on the riser diagram will be highlighted.

•   Press this button to select a panel on the model.

  The dialog box will close and you will be prompted to specify a panel.

  Select instance in model to link to riser diagram:

  Specify a panel using a view of the model. The panel graphic labels will be updated to reflect the new panel. If the new panel has different upstream or downstream connections than the old panel, you will be asked whether to leave inserted circuits in their current location or erase the circuits.

•   Press this button to unlink the selected graphic from the model.

Select a panel from the tree or list and press the button. The panel graphic labels will be updated to reflect the new panel. If the new panel has different upstream or downstream connections than the old panel, you will be asked whether to leave inserted circuits in their current location or erase the circuits.