Skip to main content

Installing FireBIM

This section describes how to install FireBIM.

info

Visit the System Requirements page to make sure you can use the software before installing.

If you are a current user installing an update to the software, follow the Installing an Update instructions.

  1. Download and run the latest FireBIM installer.
    warning

    Close Revit before you run the installer.

  2. After the installer has finished, open a project or family in Revit. You should see a FireBIM Design ribbon and a FireBIM Riser ribbon.

The first time you run a command, you will be asked to install your license. You have three options:

  • To run the software in trial mode, press the button. The trial is fully featured and not time-limited. Some FireBIM outputs will randomly be replaced with FireBIM or -1 watermarks.
  • To be taken to the FireBIM product page, press the button. Licenses will be available for purchase with the release of FireBIM 1.0.
  • To install a license that was provided to you, press the button, enter your License ID and Activation Password in the fields provided, and press the button.

What Is Included in the Installer​

When you run the FireBIM installer, in addition to the system files needed to run FireBIM, the following files and libraries will be installed in the locations listed:

  •  Detail item families for the riser diagram, stored in C:\Users\<User Name>\AppData\Roaming\Design Master Software\FireBIM where <User Name> is the name you use to log in to your computer;
  •  Annotation tags for plan views and the riser diagram, stored in C:\ProgramData\Design Master Software\FireBIM\Content\Tags;
  •  FireBIM Shared Parameters.txt—used to add FireBIM shared parameters to your families, projects, and schedules—stored in C:\Users\<User Name>\AppData\Roaming\Design Master Software\FireBIM and C:\ProgramData\Design Master Software\FireBIM\Content;
  •  A core library of fire alarm panel and device model families, stored in C:\ProgramData\Design Master Software\FireBIM\Content\Model Families\Generic

Backups of the files listed above will also be installed and stored in C:\Program Files\Design Master Software\FireBIM.

The first time you run the FireBIM installer, it will also download and install a cache of riser diagram graphic families for different Revit versions. This cache installation is optional; if you opt out, the cache will be generated as you use FireBIM in your projects.

Installing an Update​

Download and run the latest FireBIM installer. For information about the latest version, visit the release notes page.

warning

Close Revit before you run the installer.

Your existing customization will not be overwritten during the update.

Your license will remain the same. You do not need to install or update the license when you update the software.