Skip to main content

Connecting Switches to Devices

This tutorial teaches you how to connect switches to a device.

Open drawing E-1.1.

Connect Switches to Devices​

  1. Run the Connect Device to Switch Group command.
    Ribbon: DM Electrical→Devices→  Connect Device to Switch Group
    Pulldown Menu: DM Electrical→Switches→Connect Device to Switch Group

  2. Select a switch on the drawing.

  3. Select the devices in the same room as the switch.

  4. Repeat for the other switch on the drawing.


When a switch with a subscript is connected to a device, the subscript is added to the device as well to indicate that they are connected.