Modify Devices

This section describes the commands available for modifying devices on the drawing.

📄️ Query Device

The Query Device command allows you to select any device and view and edit the information associated with it. It will work with distribution equipment, light fixtures, receptacles, equipment, switches, junction boxes, low voltage devices, conduits, and cable trays.

📄️ Array Device (2 Point)

The Array Device (2 Point) command is used to array devices on the drawing in a straight line from the first device to a second point.

📄️ Array Device (Distance / Angle)

The Array Device (Distance/Angle) command is used to array devices on the drawing in a straight line from the first device in a set direction with a set distance between each device.

📄️ Copy and Increment Circuits

The Copy and Increment Circuits command allows you to simultaneously copy a device that is circuited and circuit the copied device.

📄️ Insert Note

To insert a note on a device, go to

📄️ Edit Note

To edit a note on a device, go to

📄️ Insert Device Elevation Label

The Insert Device Elevation Label command is used to insert a label on a distribution equipment or branch circuit device that displays the elevation of the device.

📄️ Move Note

The Move Note command can be used to move any note associated with a device on the drawing.

📄️ Rotate Note

The Rotate Note command can be used to rotate notes and labels on the drawing, including:

📄️ Erase Note

To erase a device note, go to

📄️ Erase Part of Device

Design Master devices are created on the drawing by grouping multiple standard CAD entities. Sometimes, an entity that should have been removed is left on the drawing. Using the standard CAD ERASE command will erase the entire device. Use the Erase Part of Device command instead to remove only the entity that is no longer needed.

📄️ Match Note Values and Locations

The Match Note Values and Locations command is used to copy the locations and values of notes from one device to another.

📄️ Match Note Locations

The Match Note Locations command is used to copy the location of notes from one device to another.