Walls

This section describes the commands used to modify the boundaries of rooms, including setting boundaries as exterior walls and adding and removing points on the rooms.

Commands

📄️ Query Wall

The Query Wall command is used to view and modify the settings on individual edges of a room.

📄️ Match Wall Properties

The Match Wall Properties command is used to copy the wall properties from one wall in a room to another. All of the values set using the Query Wall command will be copied.

📄️ Insert Wall Point

The Insert Wall Point command will break a wall in a room into two pieces. The two walls can be given different definitions for loads. The break point can be moved to define a new outline for the room.

📄️ Remove Wall Point

The Remove Wall Point command will remove a point from a room outline. The two walls connected at that point will be joined into one wall.

📄️ Wall Project Schedule

The wall project schedule contains the wall types available to be used in the current project.

📄️ Wall Master Schedule

The wall master schedule contains the wall types that may be used by a company on a project. See the Master and Standards Databases section for more information about using master databases.

📄️ Door Project Schedule

The door project schedule contains the door types available to be used in the current project.

📄️ Door Master Schedule

The door master schedule contains the door types that might be used by a company on a project. See the Master and Standards Databases section for more information about using master databases.

📄️ Glass Project Schedule

The glass project schedule contains the glass types available to be used in the current project.

📄️ Glass Master Schedule

The glass master schedule contains the glass types that might be used by a company on a project. See the Master and Standards Databases section for more information about using master databases.