Configuring Neutrals « Knowledge Base

You are here: Home > Support > Knowledge Base > Configuring Neutrals

Configuring Neutrals

Thursday, March 8th, 2018

Q: How do I configure neutrals for panels and branch circuits using Design Master Electrical for Revit?

A: Neutrals are configured in the Revit Electrical Settings. Detailed instructions are provided in the video below as well as in the Neutrals page of the user manual.

Awesome, share it:

Thanks!

We appreciate your feedback.

Filter by

Post Page

Electrical Electrical RT Training Recording Video Electrical RT Training RT One-Line Diagrams Electrical RT General Distribution Equipment (Panels and Transformers) Circuiting

Sort by

Reading and Configuring Time-Current Curves

A brief explanation of what each part of the time-current curve represents and how you can make changes to the curve in Design Master Electrical.

Training Recording: Electrical for Revit Feeder IDs

Learn all about feeder IDs on your single-line diagram. See how we generate them, where we store them, and how you can reuse them across projects and users.

Training Recording: Arc-Flash Calculations

Review the basics of arc-flash calculations, then look at how to perform them in Design Master Electrical RT.

Training Recording: Breaker Curves in Revit

This training video shows you how to set breaker curves for performing selective coordination and calculating arc-flash trip times in Design Master Electrical RT 2.0.

Training Recording: Wire Lengths in Revit

Learn how Design Master calculates wire lengths. We look at all the settings and options that exist for feeders and branch circuits. We talk about the default lengths that are calculated and when you might want to override them for more

Ground Wire Is Too Large

If you upsize your conductors, Design Master will automatically upsize your ground in accordance with NEC 250.122(B).

866-516-9497

8000 Regency Parkway, Suite 585
Cary, NC 27518

support@designmaster.biz